Hone or sharpen?
Most knives that feel dull just need honing. Some need a new edge. A few should go back to the maker. Four questions sort out which.
The tree behind it
- Cutco Double-D edge? Send it to Cutco. Cutco says no home sharpener or sharpening service.
- Crack, broken tip or chip over about 2 mm? Maker's service or a professional.
- Ceramic? Only a diamond sharpener the knife maker approves. Kyocera's only covers Kyocera knives.
- Small chip? Coarse grit first, then finer. See the grit selector.
- Serrated? Only tools whose maker lists serrated edges. See serrated sharpeners.
- Honed and still dull? Sharpen. Honed and it helped? Keep honing.
- Not honed yet? Hone, then repeat the paper test.
Why the difference matters is drawn out on honing vs sharpening. If the answer is "sharpen," the sharpener finder matches one to your knife. Schedules from knife makers are in how often to sharpen.
FAQ
- Does honing remove metal?
- Shun says honing does not create a new edge and does not remove metal. Sharpening removes metal to make a new edge.
- Can I fix a chipped knife at home?
- Shun's service sharpens out chips of 2 mm or under by removing the metal in line with the chip. At home that means starting on a coarse grit. Larger damage is a job for the maker or a professional.