Find a knife sharpener that fits your knives
As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Read our affiliate disclosure.
The right sharpener depends on the knife more than the sharpener. A Wüsthof chef's knife leaves the factory at 14° per side, a Shun at 16° and a Miyabi at 9.5–12°. Some sharpeners have one fixed angle. Others won't touch a serrated or ceramic blade. Answer six questions and we'll narrow 15 sharpeners to one to three, using only what the makers publish.
The finder runs in your browser, and nothing you enter is sent anywhere. A sharpener is only ruled out for a physical reason: its maker doesn't list serrated, ceramic or single-bevel knives. Everything else stays in with a Trade-off line, such as a fixed angle that differs from your knife's. To see your knife's factory angle, use the angle finder.
Best for your situation
- Electric
Fixed-angle machines: 15°, 20° or both.
- Manual pull-through
No power, a few pulls, one or two angles.
- Whetstones for beginners
Water stones and a diamond plate, with grits that make sense.
- For Japanese knives
Narrow edges, single bevels and what the makers allow.
- For German knives
14–15° Western edges and sharpeners set to match.
- For serrated knives
Only tools whose makers list serrated edges.
- Guided systems
Clamps and rods that hold the angle for you.
- Rolling sharpeners
Magnetic angle block plus a rolling disc.
Tools
- Sharpening angle finder
Your knife's factory angle from its maker, and which sharpeners match it.
- Hone or sharpen?
Four questions: hone, sharpen, fix a chip or send it out.
- Whetstone grit selector
Edge condition in, grit sequence out, from stone makers' own advice.
Guides
- Sharpening angles by brand
Factory angles from Wüsthof, Zwilling, Shun, Global and more.
- Honing vs sharpening
Realigning an edge versus making a new one.
- Electric vs manual vs whetstone
Speed, control and what each one can't do.
- How often to sharpen
What Shun, Victorinox and Global tell owners.
- Do sharpeners ruin knives?
The mistakes makers warn about, in their words.
- How to tell if a knife is sharp
Paper test, burr check and marker method.
- Whetstone grit chart
What 325, 400, 1000, 2000 and 6000 grit are for.
Compare
- Whetstone vs electric
Any angle by hand or a fixed angle in seconds.
- HORL vs Tumbler
Two rolling sharpeners at 15° and 20°.
- Work Sharp vs Chef'sChoice
Two brands, electric, manual and more.
- Chef'sChoice 15XV vs 1520
One 15° edge, or 15° and 20° in one machine.
How we pick
There's no lab here. Every angle, grit and "works with serrated" line comes from the sharpener maker's own product page or manual. Every factory angle comes from the knife maker's own page. Each card links to those pages. A model only gets an Amazon button after we confirm a new listing for that exact model. Read more in how we choose.
Specs verified: November 2026 · Updated 2026-11-18 · How we choose