Sharpeners for Japanese knives

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Read our affiliate disclosure.

"Japanese knife" covers a wide range of edges. Miyabi hand-hones at 9.5–12° per side, Shun sharpens at 16°, and Global gives 10–15°. A traditional yanagiba is single-bevel, flat on the back. The right sharpener is the one that can reach your maker's angle.

Factory angles from the makers

Knife makerPublished angleWhat fits
WÜSTHOF — Asian-style (santoku, nakiri)10° per sidewhetstone or diamond plate held at the maker's angle (no fixed setting below 14° here)
ZWILLING — ZWILLING santoku9–12° per sidewhetstone or diamond plate held at the maker's angle (no fixed setting below 14° here)
MIYABI — All MIYABI series9.5–12° per sidewhetstone or diamond plate held at the maker's angle (no fixed setting below 14° here)
Shun — Shun double-bevel knives16° per side15° fixed settings, adjustable systems, stones
Global — Global knives10–15° (per side or total not stated)stones and adjustable systems; 14–15° fixed settings come close
MAC — MAC knives15° per side15° fixed settings, adjustable systems, stones
Made In — Santoku12.5° per sidestones and adjustable systems; 14–15° fixed settings come close

At a glance

ModelAnglesAbrasive and gritStagesSerratedCeramicWarranty
Shun Combination Whetstone 1000/6000any, held by handwater stone (1000 / 6000)2not publishednot publishednot published
Work Sharp Precision Adjust Knife Sharpener15–30° per side, adjustabletri-brasive rod: diamond + fine ceramic (320 / 600 / fine ceramic)3with an add-on serration rod (not in the box)not published3 years
Chef'sChoice AngleSelect 152015° and 20° per side100% diamond (stages 1–2), stropping disks (stage 3)3yes (manual)no1-year limited (manual)
SHARPAL 156N Dual-Grit Diamond Whetstoneany, held by hand (guide marks 14°, 17°, 20°, 25°)diamond (325 / 1200)2not publishednot published3-year (Sharpal site)
15° versus 20° per sideTwo edge cross-sections. A 15° per side edge has a 30° included angle and is narrower; a 20° per side edge has a 40° included angle and is wider. 15° 15° per side 30° included typical of Japanese-style makers 20° 20° per side 40° included a common fixed setting on sharpeners Included angle = 2 × the angle per side on a symmetrical edge. Not to scale.

The picks

Premium · whetstone (water stone)

Shun Combination Whetstone 1000/6000

  • any, held by hand
  • 2 stages
  • Serrated: not published

Good fit for: Japanese knives at their own angle; restoring a dull edge, then polishing.

VariantSSM0600
Typewhetstone (water stone)
Anglesany, held by hand
Abrasive and gritwater stone (1000 / 6000)
Stages2
Serrated knivesnot published
Ceramic knivesnot published
Single-bevel knivesnot published
Powermanual
Water or oilwater — soak before use
Warrantynot published

Limits: no coarse side for chips; angle is held by hand; stone must be soaked first.

Shun factory edge is 16° per side (Shun FAQ); angle is held by hand.

Skip it if… you want a sharpener with a fixed angle; your knives are chipped.

Sources: manufacturer page · maker support page · Checked Nov 18, 2026

Check price on Amazon

Mid-range · guided (clamp + rod)

Work Sharp Precision Adjust Knife Sharpener

  • 15–30° per side, adjustable
  • 3 stages
  • Serrated: with an add-on serration rod (not in the box)

Good fit for: any angle from 15° to 30° in 1° steps; matching a maker's factory angle.

VariantWSBCHPAJ
Typeguided (clamp + rod)
Angles15–30° per side, adjustable
Abrasive and grittri-brasive rod: diamond + fine ceramic (320 / 600 / fine ceramic)
Stages3
Serrated kniveswith an add-on serration rod (not in the box)
Ceramic knivesnot published
Single-bevel knivesnot published
Powermanual
Warranty3 years

Limits: serrated needs an add-on rod; lowest setting is 15°.

Angle set from 15° to 30° in 1° steps (maker).

Skip it if… your knives are under 15° per side; you want a two-minute sharpener.

Sources: manufacturer page · Checked Nov 18, 2026

Check price on Amazon

Premium · electric

Chef'sChoice AngleSelect 1520

  • 15° and 20° per side
  • 3 stages
  • Serrated: yes (manual)

Good fit for: a mixed block of 15° and 20° knives; serrated knives; single-bevel knives (maker procedure).

VariantModel 1520, SKU 0115207
Typeelectric
Angles15° and 20° per side
Abrasive and grit100% diamond (stages 1–2), stropping disks (stage 3)
Stages3
Serrated knivesyes (manual)
Ceramic knivesno
Single-bevel knivesyes — manual gives a single-bevel procedure
Powercorded, 120 V
Warranty1-year limited (manual)

Limits: 1-year limited warranty; not for thick old cleavers (manual).

From the maker's instructions:

  • Manual: not for ceramic knives or scissors, and not for old thick European cleavers. (maker's note)

Stage 1 is 15° (Asian-style), stage 2 is 20° (European/American), stage 3 strops both (maker page).

Skip it if… you own ceramic knives; your knives are under 14° per side.

Sources: manufacturer page · manual · Checked Nov 18, 2026

Check price on Amazon (white finish)

Budget · diamond plate

SHARPAL 156N Dual-Grit Diamond Whetstone

  • any, held by hand (guide marks 14°, 17°, 20°, 25°)
  • 2 stages
  • Serrated: not published

Good fit for: dry sharpening with no soaking; single- or double-bevel knives (maker); beginners who want an angle guide.

Variant156N, 6 × 2.5 in, 325/1200
Typediamond plate
Anglesany, held by hand (guide marks 14°, 17°, 20°, 25°)
Abrasive and gritdiamond (325 / 1200)
Stages2
Serrated knivesnot published
Ceramic knivesnot published
Single-bevel knivesyes — maker: single or double bevel
Powermanual
Water or oilnone — sharpen dry
Warranty3-year (Sharpal site)

Limits: finishes at 1200 grit; angle guide has four set angles.

Angle Pyramid guide marks 14°, 17°, 20° and 25° (maker).

Skip it if… you want a polished, mirror-like edge.

Sources: manufacturer page · maker support page · Checked Nov 18, 2026

Check price on Amazon

Single-bevel knives

For single-bevel knives, the Chef'sChoice 15XV and 1520 manuals give their own procedure: sharpen the beveled side only, in the stage the manual names. Sharpal says the 156N handles single or double bevels. The Chef'sChoice 4643 pull-through isn't for single-bevel knives, and Kyocera's DS-38 says the same. The edge shapes are drawn on sharpening angles by brand.

What the knife makers warn about

Shun warns against using a diamond steel for regular honing and offers free lifetime sharpening (you pay shipping). Global's UK site says it doesn't recommend electric sharpeners because they "tend to strip a lot of metal off the blade." Look up your exact knife in the angle finder. For stones, start with whetstones for beginners, or set an exact angle on a guided system. Rolling sharpeners with a 15° block are on rolling sharpeners.

FAQ

Can I use an electric sharpener on Japanese knives?
It depends on the knife maker. Global (UK) doesn't recommend electric sharpeners. Shun says an electric sharpener is fine if it's equivalent to Shun's own. Chef'sChoice gives a single-bevel procedure for the 15XV and 1520.
What angle are Japanese knives?
It varies by maker: Shun says 16° per side, Miyabi 9.5–12°, Global 10–15°, and Wüsthof's Asian-style knives 10° per side.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose