How often to sharpen kitchen knives

There's no universal schedule, but knife makers do give owners rough numbers. The pattern across them is the same. Hone often, sharpen rarely, and let the edge, not the calendar, decide.

What makers suggest

MakerHoningSharpeningSource
Shun"Some cooks hone once a week, while others hone every day"; weekly home cooking: about once a week"about once a year is often enough" for many home cooks; more for heavy useShun
Victorinoxevery few usesonce or twice a yearVictorinox
Global (UK)weeklytwo to three times a yearGlobal

All three agree on the structure. Honing is the regular step, measured in days or uses. Sharpening is the occasional one, measured in months. Shun's summary: "hone for maintenance, sharpen for restoration."

Why the numbers differ

The figures depend on the knife and on how it's used. Shun explains that its knives are thinner and harder than typical German knives (it hardens VG10 and VG-Max steel to 60–61 Rockwell and SG2 to 61–62), and that harder steel tends to hold an edge longer. Victorinox and Global make different steels and edges, and they suggest different intervals. How often you cook, what you cut and what you cut on matter as much as the brand. Shun notes that professional cooks or anyone using knives heavily "will likely need to sharpen more often."

Signs it's time

A calendar is only a rough guide, so watch the knife instead. Common signs include tomato skins that the blade slides over instead of cutting, onions that crush instead of slicing, and paper that tears instead of parting. None of these mean sharpening yet. They mean check the edge. A rolled edge feels the same as a worn one in use, and honing fixes the first in a few strokes. Keep a simple habit: hone when the knife starts to feel less keen, and note how long the effect lasts. When honing stops making a difference, that's your sharpening interval. It will probably land near the makers' numbers above.

Different knives, different intervals

Don't expect every knife in the block to need sharpening at once. A chef's knife used daily wears faster than a slicer used on holidays, and a paring knife used on a plate wears faster than one used on a board. Serrated bread knives are a special case. Global says its serrated knives don't need sharpening at all, and Cutco says its Double-D edges go back to the factory. See serrated sharpeners for the ones whose makers allow it.

Let the edge decide

  1. Feels like it's slipping or tearing? Hone first. If that brings it back, it didn't need sharpening yet.
  2. Honing no longer helps? Shun's rule: "When your knife is dull and honing no longer provides improvement, it's time for sharpening."
  3. Visible chips or a broken tip? That's a repair, not routine sharpening. Shun sharpens out chips of 2 mm or under. Use the hone-or-sharpen tool.

Simple ways to check an edge, like the paper test and the burr check, are in how to tell if a knife is sharp.

Sharpening less often

When it's time

If honing doesn't help, the next question is how. A touch-up on a fine grit, or a full sharpening on a medium one? The grit selector answers that for stones. The finder picks a sharpener if you don't have one. Shun owners can also send knives in: Shun sharpens them free for as long as you own them; you pay shipping and processing.

FAQ

How often should you sharpen kitchen knives?
Shun says about once a year is often enough for many home cooks. Victorinox says once or twice a year, Global's UK site two to three times a year. Heavier use means more often.
How often should you hone a knife?
Shun says some cooks hone once a week and others every day. Victorinox says every few uses; Global's UK site says weekly.