HORL vs Tumbler

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Read our affiliate disclosure.

Both are rolling sharpeners. A magnetic block holds the knife at 15° or 20°, and a roller with a diamond disc grinds the edge. The differences are in the second disc and in which knives each maker allows.

Side by side

ModelAnglesAbrasive and gritStagesSerratedCeramicWarranty
HORL HORL 2 Rolling Knife Sharpener15° and 20° per sidediamond disc + ceramic honing disc2noyes — hold the angle by hand, since ceramic isn't magnetic (maker FAQ)not published
Tumbler Original Rolling Knife Sharpener15° and 20° per sidediamond disc + stainless-steel helix honing disc2nononot published
HORL 2Tumbler Original
Angles15° and 20°15° and 20°
Sharpening discDiamond (electroplated, about 55% diamond on a nickel plate)Diamond
Second discCeramic honing disc, removes the burrStainless-steel helix for honing
Ceramic knivesYes, but hold the angle by handNo
SerratedNoNo
WaterDrynot stated
AmazonVerified listingNo verified Amazon listing for this exact model

From HORL's product page and FAQ, and Tumbler's product page and FAQ.

15° or 20° on either

Both makers offer the same two angles. HORL describes 20° as robust sharpness for sturdy blades like European chef's knives, and 15° for hard, fine steels. Tumbler labels 15° fine or Japanese-style and 20° standard or Western-style. For single-bevel knives, Tumbler says to check the knife maker's angle first. Your knife maker's figure is in the angle finder and on sharpening angles by brand.

HORL 2

Premium · rolling

HORL HORL 2 Rolling Knife Sharpener

  • 15° and 20° per side
  • 2 stages
  • Serrated: no

Good fit for: 15° and 20° knives with a magnetic angle hold; diamond disc needs no replacing when used properly (maker FAQ).

VariantWalnut (HO2-NUT)
Typerolling
Angles15° and 20° per side
Abrasive and gritdiamond disc + ceramic honing disc
Stages2
Serrated knivesno
Ceramic knivesyes — hold the angle by hand, since ceramic isn't magnetic (maker FAQ)
Single-bevel knivesnot published
Powermanual
Water or oilnone — used dry (maker FAQ)
Warrantynot published

Limits: no serrated knives (maker FAQ); ceramic knives need the angle held by hand.

Skip it if… you need to sharpen serrated knives; your knives are under 15° per side.

Sources: manufacturer page · maker support page · Checked Nov 18, 2026

Check price on Amazon

Tumbler Original

Mid-range · rolling

Tumbler Original Rolling Knife Sharpener

  • 15° and 20° per side
  • 2 stages
  • Serrated: no

Good fit for: straight-edge kitchen knives at 15° or 20°; a simple two-step roll.

VariantTU01 (wood)
Typerolling
Angles15° and 20° per side
Abrasive and gritdiamond disc + stainless-steel helix honing disc
Stages2
Serrated knivesno
Ceramic knivesno
Single-bevel knivescheck the knife maker's instructions (Tumbler FAQ)
Powermanual
Warrantynot published

Limits: no serrated, ceramic knives or scissors (maker); single-bevel: check the knife maker first.

From the maker's instructions:

  • Maker FAQ: not designed for serrated knives, ceramic knives or scissors; serrations can damage the diamond disc. (maker's note)

Skip it if… you sharpen serrated or ceramic knives.

Sources: manufacturer page · maker support page · Checked Nov 18, 2026

No verified Amazon listing for this exact model. Shown for comparison only, so there's no Amazon button.

Other options

Work Sharp's RKS rolling sharpener adds 17° and 25° to the block and comes with 320 and 600 diamond plus ceramic discs. It's on rolling sharpeners. For serrated knives, neither of these works; see serrated sharpeners. For a broader brand comparison, see Work Sharp vs Chef'sChoice.

FAQ

Is HORL better than Tumbler?
They work the same way: magnetic block at 15° or 20°, a diamond disc to sharpen. The second disc differs (HORL ceramic, Tumbler stainless-steel helix), and HORL allows ceramic knives with the angle held by hand, while Tumbler doesn't.
Can either one sharpen serrated knives?
No. Tumbler says serrations can damage its diamond disc; HORL says the edge should be smooth, without serrations.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose